Odin™ Silicone Sleeve
Built for durability and comfort, this protective silicone case for the Odin vaporizer delivers a secure grip, heat resistance, and everyday protection without compromising the sleek design of your device.
Perfect for on-the-go use, the Odin Device Silicone Sleeve ensures your device stays safe, clean, and easy to handle.
Silicone Finish
Two Color Options
Textured Grip Design
Push Button Cover
Removable Fabric Wristlet
Metal Clip Attachment
Heat-Resistant Material
Open Charging Port Access
Used With
Odin Device
Shop Now
Built Tough
Takes the Hit
The Odin goes everywhere you go. The sleeve makes sure it comes back in one piece.
No Slippin'
Grip that Holds
The Odin goes everywhere you go. The sleeve makes sure it comes back in one piece.
Stays Cool
Heat, Handled
Silicone sleeve stays cool no matter how long you've been going. All the heat, none of the warmth.
Perfect Fit
Made for Odin
Every button accessible, every port clear. No bulk, no interference.
Easy Clean
Wipe. Go. Repeat.
Silicone doesn't hold grudges. Built for daily use by people who actually use it daily.
The Odin is a portable, flameless cannabis vaporizer designed for on-the-go consumption of pre-dosed flower or concentrates. It uses advanced heating technology with a proprietary heat curve to vaporize concentrates and flower efficiently. Simply insert a Dab Stick™ or Nano Joint™, set your preferred temperature and session time, and inhale once the device heats up.
Yes! The Odin is beginner-friendly due to its simple operation and flameless heating. The preset temperature settings and session durations make it easy for new users to enjoy concentrates and flower without complicated tools or setups. Simply insert a Stelo, Nano Joint or Dab Stick and inhale.
Ensure Odin is turned off. Press the power button 5 times quickly to enter session duration adjustment mode.The bottom LED light will flash to indicate the selected session time.
1 light = 2-minute Quickie Sesh
2 lights = 4-minute Full Sesh
Press the button once to switch between session times. Once selected, the Odin automatically saves your setting after 5 seconds of inactivity.
Ensure the Odin is turned off. While off, press the power button 3 times quickly to enter temperature adjustment mode. The number of LED lights indicates the heat level.
1 light = Level 1 (230℃ - 285℃ / 446°F - 545°F)
2 lights = Level 2 (240℃ - 295℃ / 464°F - 563°F)
3 lights = Level 3 (250℃ - 305℃ / 482°F - 581°F)
Press the button to cycle through the temperature levels.The setting will auto-save after 5 seconds of no activity.
Open Odin's heating chamber by turning the dust-proof cover counter-clockwise. Turn on the device after you have selected your temperature and session time settings. Insert the sealed end of the Nano Joint or Stelo into Odin, the arrow should be pointing down into the device. Dab Stick should be inserted with the concentrate facing down. You should not be able to see the concentrate when Dab Stick is inserted correctly.
Important: Once the device is turned on, do not remove the Dab Stick™ or Nano Joint™ during the session as the glass tube or stick becomes extremely hot. Wait until the session ends and the device cools before removing it.
The Odin is designed specifically for use with E10 Labs’ pre-dosed flower and concentrate pairings, which includes the Stelos, Nano Joints and Dab Sticks.
You can find E10 Labs' compatible pre-dosed pairings here.
Press the power button once to check the battery status:
3 Lights = More than 60% battery
2 Lights = Between 30–60% battery
1 Light = Less than 30% battery
To clean Odin, make sure the device is off and wait at least 5 minutes after your most recent session for the device to cool before cleaning.
Use the included isopropyl-soaked cotton swabs to clean any residue in the heating chamber. Regular cleaning after every few sessions helps maintain Odin's performance, prevents buildup and ensures the purest flavor.
While our Odin device can be shipped internationally, the Nano Joint and Dab Stick are only available in select markets.
Check out our store locator to find a dealer near you.
Couldn't find a store? Sign up for our newsletter to be the first to know when our pre-dosed pairings are available near you!
When you first get the Odin device, we recommend running a burn off cycle to help remove any residual odors, chemicals or materials left behind after the manufacturing process. We also recommend running a burn off cycle after a session if there is any material left in the heating chamber.
